Victoria Forklift Training School

Victoria Forklift Training School - The Importance Of A Forklift Training School When Utilizing The Machinery - Industry and federal regulators have established the criteria for forklift safety training based on their current standards and regulations. Those wishing to use a forklift must complete a forklift training School prior to using one of these machinery. The accredited Forklift Operator Training Program is meant to offer individuals training with the knowledge and practical skills to become an operator of a forklift.

Vehicle and Mobile Equipment safety rules that apply to forklift use consist of pre-shift inspections, and regulations for lifting and loading.

Prior to a shift beginning, an inspection checklist must be done and submitted to the Supervisor or Instructor. If whatever maintenance issue is discovered, the equipment must not be operated until the issue is addressed. To indicate the machine is out of service, the keys should be removed from the ignition and a warning tag placed in a spot that is seen.

Safety regulations for loading will comprise checking the load rating capacity on the forklift to determine how much the machine can handle. When starting the machine, the forks should be in the down position. Don't forget that there is a loss of around 100 pounds carrying capacity for every inch further away from the carriage which the load is carried.

In order to safely lift a palletized load, drive the forklift to the pallet and stop with the fork three inches away from the load. Level the mast until it is at right angles to the load. Raise the forks to one inch beneath the slot on the pallet and drive forward. Next lift forks four inches. Tilt back the load to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to alert other employees. Never allow forks to drag on the ground.

Click to Download the pdf